Wall Putty

About JK Wall Putty

JK White Cement launched a value added product, JK Wall Putty in 2002, as a result of consistent R&D efforts and technology updations. White Cement based JK Wall Putty is the ideal base for beautiful walls, giving the smoothest surface for luxurious and silky interiors. Being water resistant, it prevents seepage and flaking, while offering maximum paint spread and minimum paint consumption.

JK Wall Putty is much better than ordinary putty as it becomes an integral part of the plaster due to its white cement constitution. This gives better compatibility, adhesive-strength and a long-life to JK Wall Putty.

Preparation of JK Wall Putty paste

  • Take required quantity of JK Wall Putty in a pan. 35-40% water by volume is required to prepare paste of good consistency.
  • Mix half of required water quantity into it. Knead/Mix the Putty & wait for few minutes.
  • Mix remaining quantity of water to get desired consistency.
  • Mix vigorously for 5-10 minutes for making a lump-free and uniform paste.
  • Mix the product in such quantities that it should be used within 2 hours of preparation.
  • Mixing may be done manually or by using a suitable electric mixer.

Application of JK Wall Putty

  • Ensure that surface is totally clean
  • Ensure that surface plastered or made with cementitious material.
  • The surface should be moderately rough and in just-wet condition.
  • Apply 1st coat of JK Wall Putty (1.5 mm thickness) using a blade / spatula on the wall with a “bottom to up” configuration
  • Apply 2nd coat of JK Wall Putty (1.0 mm thickness) preferably after 4 hours in summers and after 12 hours in winters. Second coat shall be applied “horizontally” to even out application marks of 1st coat, if any.
  • Remove putty paste again for 1 minute, if it is left undisturbed for 30 minutes.
  • Allow complete drying for 3 days and then use a fine emery paper to remove application marks, if any.

Do you want to become a Seller?

Sign Up